18-8 Stainless Steel Flat Head Pozi Tapping Screw Type B
The blunt screws are often refered to as Type "B" thread-forming
screws, they require a drilled hole and are typically used in
0.050"-0.200" material. Flat heads are countersunk (cone shaped
under the head) with a flat top.
The Pozi-drive was invented to further improve on the torque and
cam-out of the Phillips head.
Note: A Phillips Driver will fit into a Pozi screw head but a Pozi
driver will not fit into the Phillips screw head, it is not
recommended to use a Phillips driver with a Pozi screw as it will
eventually round off the recess of the head causing damage to the
screw and making it unusable.
|Finish||Plain or Passivated|
|Head Type||Flat/Counterunk Head|
|Drive Type||Pozi Drive|
|Point Type||Blunt Point|
|Diameter||#2 ~ #10, 2.2 ~ 4.8mm|
|Length||5/32" ~ 4", 4mm ~ 100mm|
|Standard||JIS, DIN, ANSI, IFI|
If you are interesed in our Philips Flat Undercut Tapping Screw for Plastic, please send us email (click on following email address) or call us directly. Best solution or suggestion must be provided in 24 hours.